Winter Adhesive (EWI-221) – 25kg


EWI-221 is the ideal product for installing polystyrene insulation systems during cold weather. With its excellent frost-proofing capabilities, Winter Adhesive can even be used in temperatures down to 0°C.

  • Waterproof
  • Frost-proof
  • High Grip
  • Contains microfibres for increased flexibility
  • Hydrophobic

Out of stock

SKU: EWI-221 Category:

EWI-221 Winter Adhesive

EWI-221 Winter Adhesive can be used both within the reinforcement layer and for fixing EPS insulation boards to substrates much like EWI-220. The major difference is that this winter adhesive can be used even when the external temperature is very low – in fact, it allows the external wall insulation systems to be installed down to temperatures as low as 0 degrees.

Note: the product can be used all year round as a bedding adhesive to stick the EPS to the masonry substrate, but tends to dry too quickly for basecoating & mesh above 12-13 degrees Celsius. 


The EWI-221 comes as 25kg dry mix. 6.3 litres of water need to be mixed with the dry mix to form the adhesive mortar. Once set firm and hard, it has excellent water and frost resistance and unsurpassed adhesive properties in colder weather. We suggest using a large bucket and adding the water prior to the winter adhesive. Once the winter adhesive has been added to the water, it needs to be mixed using a paddle mix until an even consistency mortar is produced. Once the winter adhesive has been mixed, leave the bucket for 5-10 minutes and then remix using the paddle mix. The adhesive is then ready for use.


The presence of microfibres in the winter adhesive means that it will still set in a timely fashion even at low temperatures. This means continuous workflow when conditions would normally prevent it. EWI-221 Winter Adhesive can be used for two purposes:

  • An adhesive used to create the reinforcement basecoat layer.
  • An adhesive used to fix expanded polystyrene (EPS) to a substrate.

EWI-221 is prepared in the same way regardless of whether it is being used as a basecoat adhesive or to fix the EPS insulation boards to the substrate. EWI-221 should not be used for fixing extruded polystyrene (XPS) and thermal insulation on bituminous substrates.

Application Conditions

  • Substrate primer: EWI- 301 or EWI-310 if a key is required
  • Application temperature (air, substrate, materials): from +0°C to +25°C
  • Water mix proportions: approx. 6.3 l of water per 25 kg of dry mix
  • Time of usability after mixing with water: approx. 2 hours (temp. +20°C)
  • Quantity to be used: approx. 4-5 kg/m2

Storage Conditions

Comes in powder form in a 25kg paper bag.

Store in a cool, dry place. Avoid ingress of water. Shelf life: up to 12 months from the date of manufacture.

Shopping Cart